402 Logan 2000 Push style Hand Bevel Mount Cutter

Aluminium chassis with the blade held on a sliding holder

The blade slides through a precision machined slot in the base of the chassis, which stabilises it for better cutting.

It does that by holding the blade at the correct angle as it is pushed into the mountboard at the correct angle. This helps minimise 'hooking' at the start of a cut. There is an adjustable stop to set blade depth.

The cutting tip of the blade is not visible, but guide marks on the holder indicate start and stop positions for the cut.

Made in USA. Use Logan 270D mountcutter blades. Includes five blades.

Upgrades:

The #2000 slides alongside a guide rail and can become a #302 which hooks onto a guide rail by fitting the plastic guides, part number 6131.

The same guides can be fitted to the #4000, which then becomes a #702. The #302 and #702 cutters are only included in kits and are not available separately.

With the guides fitted, the #2000 and #4000 will also hook onto Keencut Safety Edges.

See also:

1227 Logan 270D Mountcutter blades

6131 Plastic guides set

6094 Keencut Safety Edge 900mm

CT371 ColourMount Arctic White mountboard

Are you new to cutting mounts?

At LION we stock an extensive range of mountcutters, from Logan hand bevel cutters through Logan baseboard cutters up to professional Keencut and Fletcher cutters. They are all great quality cutters relative to their price point – but it can take time to learn to get good results. In general, the lower the price point, the more practice is required. We recommend that you access Logan’s Learning Center, an extensive library of training guides and videos.

Logan mountcutters can only be returned for credit if it is clearly established that there is a manufacturing fault.