6925A CWH1 Micro Sawtooth Picture Hangers for Stretched Canvas pack 50

CWH1 picture hangers were originally designed to hang printed canvases on stretcher frames

They work equally well with wood and polymer picture frames. The little alignment guides speed accurate alignment on the frame.

CWH1 picture hangers can be fitted centrally on the top of smaller frames or in pairs, one each side, on larger frames. They hang on most pins, screws and hooks.

This pack has 50 CWH1 picture hangers, enough for 25 larger or 50 smaller frames.

Subject to quality of installation, one CWH1 hanger should take a 2kg frame and a pair a 5kg frame.

The pressed-in ‘X’s’ help when measuring the spacing between the hangers for positioning the hooks on the wall. It can be helpful to use Post-its and mark them, not the wall – nail through and then tear off.

CWH1 hangers are 50mm x 46mm, 1mm steel, zinc plated. Holes & slots are 4.0mm.

CWH picture hangers are not designed to work with cord or wire.

See also:

Pozidrive / cross head woodscrews

Slotted woodscrews

Frame bumpers

Picture Hooks

More info:

Registered Design: LION CWH Hangers are subject to Registered European Community Design No. 00746 3690 - 0001

Z01