9563 Inglet MT481 Mitre Saw for aluminium

Fast, accurate and safe cutting of a wide variety of aluminium frame and sub-frame profiles

The MT481 saw is ideal for users cutting around 40 frames per day.

TCT blade, 250mm, cuts up from below, so vibration in the blade is absorbed by the unseen and sturdiest part of the profile before it cuts through the top face. This gives a very neat and precise join. Pre-set positions for 45° left, 90° and 45° right cuts.

Unique blade action and a stout polycarbonate cover means that swarf and offcuts are deflected back into the waste chute. They don’t whizz around the workshop at lightning speed as can be the case with normal single blade mitre saws.

• Adjustable pneumatic clamp with polymer face secures most profiles up to 54mm tall and 50mm wide. Check with our technical department if your profiles approach either dimension.

• Quickly and accurately mitre-cut or straight-cut aluminium pieces up to 1000mm. Scales system helps you set the adjustable stop to allow for different profile widths.

• 0.75hp direct-drive 3000rpm single-phase motor is low-noise.

• Offcuts fall down chute into box for disposal. Blow gun for clearing work surface.

220 / 230 V (50Hz), Nominal power 0.75 hp 3000 rpm
Saw blade: 250mm x 30m bore, 80 tooth
Max cutting height: 54mm, max cutting width 50mm
Overall width: 1500mm. With optional left-hand support, 2480mm
Machine height: 1180mm, depth 510mm, 95 Kg
Requires 13 amp connection and compressed air supply

See also

9571 MT481 Measuring Arm Extension

Choosing new framing equipment?

Our experienced Technical Team can help you choose the right framing equipment for your workshop, whether you’re just starting out or thinking of upgrading. They can also assist with installation, servicing and spare parts. Just email techserv@lionpic.co.uk or call 0121 773 1230.

We can also help you spread the cost of professional framing equipment over 3 or 6 monthly instalments, find out more:

• 3 instalments made 30, 60 and 90 days from invoice at 0% interest on equipment over £1000.

• 6 instalments made 30, 60, 90, 120, 150 and 180 days from invoice at 0% interest on equipment over £2000.

• You’ll need to open a credit account to apply.

• All goods remain property of LION until paid in full.

• Our Terms & Conditions apply.

For higher value purchases we also work with Kennet Leasing, allowing you to spread the cost over 3-5 years. We take no commission so you get the best deal. Find out more: Kennet Equipment Leasing