7702 Alfamacchine Flexipoints 15mm Standard 6,000 Box

Flexipoints can be bent up to allow the frame backing to be removed

Flexipoints are fired into the back of a frame against the backing board to hold it in place.

Designed to work with most flexipoint drivers. They fit the LION Flexipoint Driver, Inmes FI-150M, FP-150, Cassese, Flex 0.4, Omer, Tabmaster, T-220 and similar flexipoint drivers. They do not fit Fletcher drivers.

Standard flexipoints are to the internationally accepted size of 15mm x 4.5mm and these are 0.4mm thick. Made in Italy.

Bonded along the sides into strips with minimal adheisve to reduce jamming

More info:

Loading flexipoints into your driver: The high-speed pressing process in manufacturing makes each one very slightly rounded one way at the edges. If you find that they jam in your driver, try re-inserting them the other way round.