7828 Alfamacchine Flexipoints 15mm Semi-Rigid 6,000 Box

Made from a higher grade of steel and more rigid than standard Flexipoints

Semi-rigid flexipoints are fired into the back of a frame against the backing board. They push down to hold the glass, artwork and backing in place. They differ from standard flexipoints as they are made of a higher grade of steel which is more resistant to bending, so are more often used in framing where the back is less likely to be opened.

Designed to work with most flexipoint drivers. They fit LION Flexipoint Driver, Inmes FI-150M, FP-150, Cassese, Flex 0.4, Omer, Tabmaster, T-220 and similar flexipoint drivers. They do not fit Fletcher drivers.

Standard flexipoints are to the internationally accepted size of 15mm x 4.5mm and these are 0.4mm thick with a silver finish.

Made in Italy.

More info:

Loading flexipoints into your driver: The high-speed pressing process in manufacturing makes each one very, slightly rounded one way at the edges. If you find that they jam in your driver, try re-inserting them the other way round.