9518 ColourMount White Core Self Adhesive Board 1.2mm 1200 x 800mm

Mount artwork on paper quickly and easily

+ Face release paper is white, silicone coated on contact side

+ Face of the board has a white liner coated with high initial tack pH neutral acrylic-based pressure sensitive adhesive

+ Core is solid wood pulp, off-white

+ Back has a white paper liner

+ Thickness: 1.2mm

+ Sheet size: 1200mm x 800mm

+ Lightweight yet rigid. Easy to cut with a knife or blade cutter, dust free

+ Art on paper mounted on this board will remain permanently fixed

Generally, do not peel off the release paper in one go. Try folding back a 25mm strip along one edge, positioning the print and then gradually peeling it back further, smoothing the paper down as you go. 

A brayer roller works well but for best results use a roller laminator. To remove any bubbles, try smoothing the surface of the picture carefully with a clean dry soft cloth or cotton glove, starting from the centre and working your way outwards. 

This board is 1.2mm thick, sheet size 1200 x 800mm.

See also:

3143 Brayer roller

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.